Automotive Power Failure Simulator PRM16750G

Automotive Power Failure Simulator PRM16750G

Description

Send us your enquiry
Category:

Product Description

A series Automotive Power Failure Simulator PRM16750G is standalone test equipment with an electronic switch inside, it can simulate voltage dip and drop (micro interruption) and ensure the voltage fast rising or falling time to be within 1µs. It needs two DC voltage sources for simulating voltage dip but needs only one DC voltage source for simulating voltage drop (micro interruption). With the original technology of output impedance variable, it can simulate the power failure much more closely, simulating open circuit at high impedance and short circuit at low impedance, waveforms complying with standards under different resistive loads.

A series Automotive Power Failure Simulator PRM16750G can be operated manually or via an Ethernet interface controlled by AutoLab software. EUT power supply voltage can be switched quickly under the program control. The switch has two input ports to connect two power supplies. The load bearing of DC switching is up to 60V, available for a 42V power system test.
> Standalone test equipment used for voltage dip and short interruption test
> Rising/fall time < 1 us
> With electronic short circuit protection function
> Rated voltage 60V DC
> 5.7-inch color touch screen operation on the front panel
> Standard test program
> Ethernet interface

Technical Parameters of Automotive Power Failure Simulator PRM16750G

The voltage at primary input terminal PF1

0–60 V

Current

Max.30/50

Voltage drop

1V max@30A

The voltage at auxiliary input terminal PF2

0-60V

Switching time

Less than 1us (rising/fall time) ;

less than 10us for high resistance 1kΩ

(test condition: test voltage 13.5V/0V,1/100/1kΩ pure resistive load)

Peak current

PFS 6030A  60A duration time 500 ms

PFS 6050A  100A duration time 500 ms

Output impedance

High resistance or low resistance

Safety

Short circuit protection

Over-voltage protection

60 V

Trigger

Auto, manual, or external trigger

CRO trigger

External trigger signal by the oscilloscope, BNC,5V TTL

Repetition rate

100 ms – 999s

Drop duration time td

1us – 10 s

Size and weight

19″ / 4 U,approx.20 kg

Interface

RJ45 Ethernet interface

DUT voltage monitoring output

BNC,10:1 coaxial terminal output

DUT current monitoring output

BNC,10A:1V coaxial terminal output

Temperature range

15–35℃

Humidity range

45%–75%

Air pressure range

86kPa–106kPa

Reviews

There are no reviews yet.

Be the first to review “Automotive Power Failure Simulator PRM16750G”

Your email address will not be published. Required fields are marked *