The DLM3000 builds on Yokogawa oscilloscope legacy with new features focusing on quality, flexibility, and usability to increase our users’ productivity and meet the advanced needs of today’s mechatronics designs. Integrating the latest in touchscreen operation, solid-state storage, and high-speed signal processing, the DLM3000 enhances productivity by providing clean signals, extensive processing, and ease of operation. The DLM3000 touchscreen oscilloscope provides productivity at your fingertips.

DLM5000HD Series High-Definition Yokogawa Oscilloscope

The DLM5000HD Series High-Definition Oscilloscope is the latest addition to the Yokogawa Test & Measurement oscilloscope line-up that takes you beyond eight channels.

Adaptability is key in the development of high-performance and intelligent power semiconductor technologies and mechatronics in modern electric vehicles, motor controls, and energy efficient electronic designs. With up to 16 bits high resolution, best-in-class startup speed, the ability to support measurements up to 16 channels, high noise immunity for harsh environments, and more, the four-to-eight channel DLM5000HD Series enables easy touch navigation through a wealth of analysis features.

Adaptable for Unique Testing Requirements

The DLM5000HD High-Definition Oscilloscope from Yokogawa Test & Measurement is the new standard of high-definition oscilloscope

• Frequency Bandwidth: < 500 MHz
• Sample Rate: < 2.5 GS/s
• Vertical Axis Resolution: 12 bit
• High Resolution Mode: < 16 bit
• Measurement Memory: < 1 G points
• History Waveforms: < 200,000
• Simultaneous Multi-Channel Measurements: < 32 bit logic + 8 channels
  • < 16 channels with two connected DLM5000HDs via DLMsync
• Highly-Responsive, Intuitive 12.1in Touchscreen
  • with Traditional Oscilloscope Control Panel
• IEEE1588 Synchronous Support
• Superior Noise Immunity
• Vehicle Serial Bus
• Additional Math Channels
• Extensive Voltage Ranges
• Compact, Light, Portable

DL950 ScopeCorder Data Acquisition Recorder

The DL950 is a unique combination of a mixed signal Yokogawa oscilloscope and portable data acquisition recorder that can be used to capture both high speed transient events and long run trends

Only a ScopeCorder has the right combination of channel count, input types, triggering, and recording to tackle the job of electromechanical systems development and troubleshooting. With its multiple measurement types, excellent performance, and high reliability, the DL950 ScopeCorder will quickly become the most valued instrument in your lab.

nsight into the finest waveform details

• 200 MS/s high-speed sample rate
• 8 G points large memory
• Long recording to internal flash memory at 20 MS/s
• 10 Gbps Ethernet high-speed data transfer
• Up to 16-bit analog resolution

Versatility to discover more

• 8 input module slots
• Up to 160 synchronized channels
• A variety of isolated plug-in modules

Easy to use

• Newly designed application menu
• 12.1-inch large touch screen

The post Oscilloscopes appeared first on Technical Products.

Graphtec Data Logger GL980, Voltage, temperature, humidity, logic, and pulse measurements can all be taken simultaneously at high speed.

• Max 250Vrms Real-Time Recording and Measurement
•  8ch High-Speed Max 1MS/s simultaneous Recording
• 16bit resolution / Max 500Vp-p Measurement and Recording
• Standalone 7.0’’ TFT-LCD Display
• Standard Thermocouple and Voltage Measurement with M3 terminal and Isolated BNC Connection
• The 8ch offers isolated, analog inputs that are individually configurable for 500VDC, 250 Arms, or temperature inputs.
• Simultaneous sampling speeds of 1 MS/sec across all 8 channels are achieved
• with 4 digital inputs to 100kHz, 4 GB onboard memory with USB and SD memory card support built-in.

Incepted in the year 2014, we “Technical Products” have been able to carve a niche for ourselves by offering a quality range of high-speed data logger memory HiCorder, Graphtec Data Logger GL980, Oscilloscopic Memory HiCorder, Humidity Logger, Clamp-On Power Logger, Clamp-On Current Tester, Earth Tester, Benchtop Digital Multimeter, Dc Signal Source (calibrator), Hioki Paperless Recorder, Hioki Chart Recorder, Surge generators, and many more products. Owing to the reliability, dimensional accuracy, sturdy construction, longer functional life, and consistency in performance, our offered products are extensively demanded in the market. These are prepared using high-quality components and advanced techniques. For the convenience of the clients, we have provided various payment options. We are traders of GRAPHTEC, Prima electronics Hioki, and Ainuo.

The post GL980 High Speed, High Voltage Data Logger appeared first on Technical Products.

Large TFT display

Gl840-m multi-channel standalone Data Logger

• 7-inch wide TFT color LCD screen
• Three types of power sources: AC, DC*, rechargeable battery pack*
• Extended memory capacity using SD cards (SDHC compatible up to 32GB*)
• Max sampling interval up to 10ms
• Expandable up to 200 channels
• Access GL100 sensors and adapters
• Flexible input system for applications such as RTD, T/C, humidity, and more

GL840-M, input terminal B-564, data logger with 7″ wide TFT color LCD with waveform or digital options. 20 channel, isolated universal input channels with voltage (Ranges: 0-20mV up to 0-100V), thermocouple (Type: K, J, E, T, R, S, B, N or W), and RTD (PT100 or PT1000) inputs. Power Supply: 100-240vAC, 8.5-24vDC or internal battery pack (B-569, 7,2vDC @ 2900mAh). Dimensions: 240 x 158 x 52.5mm. Operating environment: 0 to 45°C, 5 to 85%RH. Separate port for USB flash drive support, 16-bit resolution, isolated inputs. Includes software and cables. Dual SD memory ports. The wireless option allows connection to GL100-WL units, web server access, FTP backup, and NTP clock synchronization.

GL840-WV, input terminal B565, data logger with 7″ wide TFT color LCD with waveform or digital options. 20 channel, isolated universal input channels with voltage (Ranges: 0-20mV up to 0-100V), thermocouple (Type: K, J, E, T, R, S, B, N or W), and RTD (PT100 or PT1000) inputs. Power Supply: 100-240vAC, 8.5-24vDC or internal battery pack (B-569, 7,2vDC @ 2900mAh). Dimensions: 240 x 166 x 52.5mm. Operating environment: 0 to 45°C, 5 to 85%RH. Separate port for USB flash drive support, 16-bit resolution, isolated inputs. Includes software and cables. Dual SD memory ports. The wireless option allows connection to GL100-WL units, web server access, FTP backup, and NTP clock synchronization.

The post GL840-M Multi Channel standalone Data Logger appeared first on Technical Products.

• Type: High-speed 600 volt DC or RMS Graphtec Gl2000 high speed data logger with 7″ color display. *See datasheet for full specifications.
• Analog channels: 4
• Digital channels: 4
• Analogue Input Type: Voltage, 4-20mA, Temperature.
• Speed: 1µs to 1min. All four channels simultaneously.
• Resolution: 16bit.
• Data Storage:
• Internal RAM (>1μs): Up to 4 million readings per channel.
• Internal Flash (>1ms): Up to 194 million readings per channel.
• External: USB or SD Card device, max file size is 4GB.
• PC Connection: Ethernet or USB.
• Data transfer: USB or SD card memory device plus direct to PC via a USB cable.
• Power: Optional internal battery packs or via external 12~24 volts DC.
• Software: Graphtec GL Connection software included free.

The post High Speed High Voltage Data Logger GL2000 appeared first on Technical Products.

The optional touch-screen display is detachable and allows local data logger and data acquisition configuration without a PC. The display also provides real-time feedback during data recording in the form of a multi-channel, real-time graphical display of acquired data, alarm status, and much more. The display may be attached to the GL7000 processor or tethered up to 10 meters away from the processor using a standard CAT-5 cable.

Data logger and data acquisition products in the GL line, the GL7000 provides extreme triggering flexibility that allows it to adapt to virtually any recording application. When enabled, the triggering features of the GL7000 automate this process and allow recording processes to be initiated and terminated based upon signal level settings, date and time, and external events. 0-100% pre-trigger information may be stored when recording to the instrument’s built-in 2,000,000 storage points (per analog module) RAM memory. Trigger level conditions include settings for edge triggering, level-only tests, and dual-level settings to allow inside/outside window triggering.

V-BUNDLE GL7000 Main Unit, GL7-DISP Display, and 1 GL7-V Voltage Input Module

• A modular system allows the expansion of measurements, channels, and internal memory
• 10 channel alarm module included with each GL7000
• Suitable for a variety of measurements by a different type of amplifier.
• Multiple storage options for reliable long-term measurement
• Easy operation via optional 5.7″ HD touchscreen display
• Supports stand-alone operation and embedding into a system
• High-performance GL-Connection software included with each GL7000

The post GL7000 Data Acquisition Unit appeared first on Technical Products.

Graphtec Data Logger GL240 Comes Standard with:

• Logic/Pulse signal input port up to 4 channels
• Flexible input system for voltage, temp, humidity, pulse, and logic signals
• Smartphone, remote access monitoring capability

Application Industries Benefiting from data logging with the GL240:

• Aftermarket Automotive Tuning
• Agriculture and Food Manufacturing
• Greenhouse and Hydroponics
• Construction and Civil engineering
• Machinery Manufacturing
• Automotive Industry
• Aerospace and Military Industry
• Utilities / Gas and Electric
• Battery Manufacturing
• Electrical Appliances and Office Equipment
• Electrical Service and Maintenance Companies
• Food Processing
• Rail Transportation
• Raw Materials and Components Manufacturing
• Research and Development

COMBINING GL100-WL AND Data Logger GL240

GL100-WL can now be connected to the Data Logger GL240 as a remote sensor using the WLAN feature. GL240 supports 1 unit of the GL100-WL, with real-time recording. The measured value from the GL100-WL will appear on the GL240 display wirelessly and record in a single file along with the measurement value from the GL240 main inputs. Additional measurements for acceleration/vibration, CO2, light/UV, temp, humidity, and AC current can be wirelessly monitored.

ALL CHANNEL ISOLATED/UNIVERSAL INPUT

Channel to Channel isolation is the highlight of the Graphtec Data loggers. Along with its compact footprint, Data Logger GL240 contains an isolated input system that ensures that signals are not corrupted by inputs from other channels.

MAXIMUM SAMPLING INTERVAL OF UP TO 10MS

Provides a faster sampling rate of 10ms for a single channel voltage measurement. The simultaneous scanning feature allows up to 100 ms when measuring all 10 channels.

BUILT-IN 4GB FLASH MEMORY WITH SD CARD SUPPORT

The new GL series enables reliable long-term measurement with its built-in 4GB flash memory and SD card slot for external storage devices.

USEFUL FUNCTIONS

Various functions, such as a bar chart data display, alarm output function, and networking features, are available in the Graphtec Data Logger GL240 to assist with convenient and helpful features for additional Data logging capability.

The post Graphtec Data Logger GL240 appeared first on Technical Products.

All channels are isolated channel-to-channel and channel-to-ground. It has the ability to perform simultaneous measurements of voltage, temperature, and humidity. It also supports such inputs as pulse (e.g. power, rpm, and flow) and logic, in addition to voltage and temperature.

Record directly to USB memory
The new LOGGER Gl840-M  is compatible with high-capacity USB memory devices and also features 12 MB of internal flash memory.

Large TFT display

The 5.7-inch TFT display is bright and easy to read, with a choice of three screens to suit the measurement application. The settings screen shows the input signal waveform in order to illustrate the impact of each modification in real-time.

The Logger Gl840-M operates on both AC and DC, as well as on battery power supplied via twin onboard batteries designed to allow nine hours of continuous operation. (Actual time may vary depending on settings and operating conditions). The Logger  Gl840-M has been designed to provide maximum protection for important measurements.

Data, by switching automatically to battery back-up in the event of an interruption to the AC power supply, stopping　measurement, and closing all files when the battery　power is low. Terminal units are standardized to 20 channels per unit (expandable to a maximum of 200 channels), with insulated and multi-function inputs on all channels.

In addition, further expansion to up to 500 channels is possible by connecting multiple Logger Gl840-M  units to a computer via USB/LAN connections.

LOGGER GL840-M Multi-Channel

• Sample analogue 10 channel measurement
• Recording interval
• (sampling speed) l100 ms 200 ms 500 ms 1 s 10 s
• 12 MB internal
• flash memory Approx. 13 hours Approx. One day + 3 hours Approx. Two days + 21 hours Approx. Five days Approx. 58 days.
• 256 MB USB memory Approx. 12 days Approx. 25 days Approx. 62 days Approx. 125 days Approx. 1,256 days.
• 7-inch wide TFT colour LCD screen
• Three types of power source: AC, DC*, rechargeable battery pack*
• Extended memory capacity using SD cards (SDHC compatible up to 32GB*)
• Max sampling interval up to 10ms
• Expandable up to 200 channels
• Access GL100 sensors and adapters

USEFUL FUNCTIONS

• Various functions, such as a bar chart data display, alarm output function, navigation function, and networking features are available in the GL840 to assist users to maintain recording comprehensive capabilities

DIRECT CSV / EXCEL RECORDING WITH REAL-TIME MONITORING CAPABILITY

• Graphtec APS software now carries a direct excel download capability with the ability to create real-time reports as the rows populate on the Excel sheet. You can populate your spreadsheet in real-time and showcase the waveform as you record.

The post GL840-M Multi Channel appeared first on Technical Products.

Midi Data Logger GL980 Voltage, temperature, humidity, logic, and pulse measurements can all be taken simultaneously at high speed.

LARGE EASY-TO-READ 7-INCH LCD

Adopts large TFT LCD with multiple methods for displaying information.

QUICK AND EASY SETUP PROCESS of Midi Data Logger GL980

Simple operation with the cursor and enter keys with six pre-set menu screens on a large LCD.

SUPPORTS LARGE BUILT-IN RAM (4MS/CH) AND BUILT-IN FLASH (4 GB)

The long-term recording is made possible with 4 M sampling/ch built-in RAM and 4 GB built-in Flash memory. It supports both USB Flash memory and SD Card memory to be used as external storage devices for recorded data for certain sampling intervals.

Graphtec GB Says
“The Graphtec GL980 Midi Data Logger is a high speed 1MS/s isolated simultaneous 8 channel midi data logger with voltage and temperature measurements.”

GL980 Key Features:

• 7″ Wide TFT Colour LCD Screen
• Three Types Of Power Source: AC, DC, Battery Pack
• Large Built-In RAM
• Built-In 4GB Flash Memory
• All Channels Isolated
• Ideal For Voltage & Temperature Measurements
• Logic/Pulse Signal Input Port Up To 4 Channels
• Insulated Multi-Function Analog Input Port
• Smartphone Remote Access Monitoring Capability
• Connectivity: USB & Wireless LAN Capabilities
• Compatible With Windows | iOS | Android
• Warranty: 3 Years

Remote Data Transfer

Remote data transfer across a Local Area Network(LAN) or Wide Area Network (WAN) is a great way to access your data remotely. The Midi Data Logger GL980 can be connected to various ADSL, Cable, or 4G modems with TCP/IP network ports allowing the GL980 to be viewed anywhere around the world over the internet. A Virtual Private Network(VPN) also can be set up for data security if required.

Data Logger Or Data Acquisition

The Midi Data Logger GL980 is a true Data Logger in that it can operate as a stand-alone unit and does not require a computer to record data. But with sampling speeds of up to 1MS/s, the GL980 can also be considered a portable Data Acquisition unit.

Just Add The Sensors

The Midi Data Logger GL980 is supplied with all basic items to get you up and running in no time. Just add a mix of signals or sensors and you will be recording great data in no time at all.

Standard items

Conclusion:

If you are looking for a bench top or portable data logger that can sample at 1MS/s simultaneously on eight channels and measure voltages up to 500 volts, then the GL980 is the data logger for you.

The post Midi Data Logger GL980 appeared first on Technical Products.

HIGH-SPEED 1 MS/S SIMULTANEOUS SAMPLING WITH ISOLATED INPUTS

Graphtec Data logger GL2000 is equipped with an isolated input mechanism to protect signals from interferences caused by noise from other channels. 16-bit A/D converter adopted to achieve hi-speed and hi-resolution measurement.

LARGE EASY-TO-READ 7-INCH LCD

Adopts large TFT LCD with multiple methods for displaying information.

QUICK AND EASY SETUP PROCESS

Simple operation with the cursor and enter keys with six pre-set menu screens on a large LCD.

APPLICATIONS

• Flow Rate and Temperature test in Water heaters
• thermal Insulation Performance Measurement of Residential Housing
• Performance test of inverters for Air Conditioner
• Voltage And Temperature Measurement of Generators

Digital I/O

With four digital I/O logic and Pulse channels, the GL2000 can record on/off events or count pulses from a range of instruments.

Simultaneous Sampling Speed

Most data loggers available on the market switch or multiplex channels into one Analogue to Digital converter, however, the GL2000 has four separate Analogue to Digital converters. This allows the GL2000 to simultaneously sample and record data at speeds up to 1MS/S or 1μs on all four channels.

The post Graphtech Data Logger Gl2000 appeared first on Technical Products.

This allows the Data Logger to act as a measurement tool and documentation tool, analysis, and validation tool.

Key Features Of Graphtec Data Logger Gl7000

• Portability And Versatility for Onsite-testing Needs
• Multi-Function Inputs for Multiple Signal Recordings
• Channel-to-Channel isolation for Enhanced Saftey
• Quick Solution For Real-Tine Excel Recording And Reporting
• Field-Ready Instrument With Large Format Display and Ruggedness
• Differential Inputs for All Channels

DATA LOGGER APPLICATIONS

• Data Loggers in the Automotive industry
• Data Loggers in Aerospace / Military
• Data Loggers in Research & Development Industry
• Data Loggers in Food & Agriculture Industry
• Data Loggers in the Transportation industry
• Data Loggers in the Service / Maintenance industry
• Data Loggers in the Medical industry
• Data Loggers in the Quality / Inspection Industry
• Data Loggers in the Energy and Utility Industry

Graphtec Data Logger GL7000 data acquisition unit

Graphtec Data Logger GL7000 Data Platform is a module-based data acquisition platform with a standalone mechanism that provides complex testing for voltage, temp, high-speed voltage, high voltages, accelerometers, and strain gauges. The standalone system gets the data up and running quickly and accurately. Providing a true standalone test system with a touch panel display or PC-based software opens you to a quick launch cycle for a scaled test system. Measurements from different sensors can be added on with signal-specific modules. The 1MS/s maximum sampling capability provides dynamic signal recording capacity for fast-changing signal applications.

Key Features of Graphtec Data Logger GL7000

• Analog Low Pass Filter (Anti-Aliasing) for noise cancellation.
• Versatile input modules for various signal levels.
• A standalone system with the capability to enhance future test signal requirements.
• Enhanced memory capability for extended recording on four different memory mediums.
• Compatible software usage with our other portable GL data logger instruments.
• Software package included with the purchase of the platform.
• Dual sampling capability in recording long-term data and transient dynamic data simulation based on a trigger.
• Graphtec Data Logger GL7000 -V-BUNDLE GL7000 Main Unit, GL7-DISP Display, and 1 GL7-V Voltage Input Module.
• The modular system allows the expansion of measurements, channels, and internal memory.
• 10-channel alarm module included with each Graphtec Data Logger GL7000
• Suitable for a variety of measurements by different types of amplifier
• Multiple storage options for reliable long-term measurement
• Easy operation via optional 5.7″ HD touchscreen display
• The display is detachable and can be remotely mounted via LAN cable (max 5m direct connection). Model No. GL7-DISP
• Supports stand-alone operation and embedding into a system; modules allow a wide range of measurements
• Ability to adapt to a wide range of applications in various measurement scenarios by extending different types of input modules.
• Graphtec Data Logger GL7000 Modules extensions
• Pick your modules and eliminate added costs by selecting your measurements based on your basic needs first. Additional modules can be added in the future.

The post Graphtec Data Logger GL7000 appeared first on Technical Products.